TW011G

Description

Cordless Impact Wrench

• 40Vmax XGT BL Cordless 3/4″ (19 mm) 1,500 N·m (1,110 ft.lbs.) Impact Wrench, Forward/Reverse Rotation Auto Stop Mode
• Overview: The TW011G is a cordless impact wrench with a 138mm (5-7/16″) long anvil with a 19mm (3/4″) square drive, powered by a 40Vmax XGT Li-Ion battery. With high power and the long anvil, it is suitable for loosening and tightening bolts and nuts in recessed areas such as the rear wheels of trucks. Four modes are available for forward rotation, with Modes 1, 2, and 3 featuring an auto-stop system to enhance bolt/nut tightening efficiency, making it suitable for tire removal and installation.
• Delivers maximum fastening torque of 1,500N·m (1,110ft·lbs) and nut-busting torque of 1,900N·m (1,400ft·lbs)
• Mode settings suitable for tire removal and installation Four modes are available for forward rotation • Mode 1: Stops immediately after seating (30 – 50N·m), which is equivalent to manual tightening of large truck tires • Mode 2: Stops approx. 0.3 seconds after seating (50 – 150N·m), which is equivalent to initial tightening of large truck tires • Mode 3: Stops approx. 0.5 seconds after seating (300 – 450N·m), which is equivalent to temporary tightening of large truck tires • Mode 4: Tightens at the maximum speed Two modes are available for reverse rotation • Mode 1-3 are on: Rotates slowly after finishing impacts • Mode 4: Loosens at the maximum speed
• Twin LED job lights at two locations (above the switch trigger and above the battery) illuminate bolts and nuts
• The full-speed mode function reduces the trigger pull to reach the full speed, reducing hand and finger fatigue from trigger pull.
• Ergonomically designed handle with rubberized soft grip provides increased comfort
• Ensures stable torque until the end of the battery capacity with constant speed control
• High water-resistance compatible with XPT (eXtreme Protection Technology)